look this screenshoot, I entered the WETH/USDC pool with $200 at price 2950. With a lower range of 2841 and an upper range of 2998.i have set triger auto exit when WETH/USDC reach 2858,3 but, the auto-exit not run correcly. because "Deposit must be higher than $1,237.48 for this automation to run" and "fee is less than gas cost"This problem is very serious. My funds in the pool could continue to decrease due to failed exits. There's no guarantee that if I deposit $2,000 into the pool and this feature works, I'm worried that a warning will appear saying "Deposit must be higher than $5,000 for this automation to run." That would be a disaster. I've opened a ticket on Discord with the code ticket-990.You stated there that you received similar feedback from other users. So, updating the Auto-Exit feature is extremely important and must be implemented immediately. This feature must be able to run even if the gas fee increases by a certain percentage. Just provide an option if the gas fee increases by a certain percentage.please follow up on this as soon as possible
I would like to have the ability to specify the exact amount of money I want to withdraw, instead of just using a slider.
Tried to deposit on wmon/usdc pool and came up "transaction failed" unspecified error, this is a bug, and to report it
Hi. I am in a BTC/USDC farm on base. I cant withdraw exit to ETH. Either it says The swap aggregator failed during simulation. Your transaction may revert. Or if it gets past that, I have in metamask that the trasaction will likely fail and it always does not go through. I have tried to increase slippage and I have also tried to make the transaction in metamask aggressive. Tried increased the GWEI etc. How can i withdraw from this pool? Please help. Thanks
It seems like the deposits are not updating. I closed out 1 position and rebalanced another pool. It has been about 45mins and they aren't showing up. I see that the pools show 0 balance on the old ones, but the new ones haven't appeared. - Normally its pretty quick, is there congestion?
I noticed the Harvest ALL button by chain. It would be really nice to be able to Harvest All after I filtered a specific group of pools. A secondary feature would be to use/set default harvest from the "Quick Harvest" icon within the table. Currently it harvest as the pool pair, but would be nice to harvest in token of choice. Been using the app for a while now. Great interface! :)
Hi, I had been enjoying vfat platform for years till your update about 3-4 days ago. I seem got rejected for no reason. It's a sudden rejection and no matter how many times I tried, I was not able to connect to Coinbase wallet. Then I deleted the app from my iPhone and then re-downloaded Base app and logged in via the manual 12 length password. Even this step is a bit scary since I did not go through it for at least 2 years. Then I finally was able to login Base app. Yet, from within the browser, it's impossible to choose Coinbase (now Base) wallet to connect to vfat. Please help resolve this ASAP! That wallet QA code shows "no usable data found" error. When I tried to search for Coinbase wallet, somehow, I seem able to view it via PC browser yet not via my iPhone app. Of course if I try to connect via Base (formerly Coinbase Wallet), it blocked connection. I don't understand why iPhone app does not show "Coinbase Wallet" option if this is due to your recent upgrade. Thanks for checking and advise.
I have a contract that I either rebalance or attempted a withdraw. It wont resolve an appears I have an open position with tokens "staked" but 0 liquidity able be removed. Pool name appears to be gone now, I can't search for it by name, CL96-USDT/LAB
Bug: Cannot withdraw Linea CL position (simpleExit keeps failing) Hey team, I’m stuck trying to exit a CL position on Linea and nothing in the UI works. Details Chain: LineaTokenId: 30380NFT Manager: 0xb56542bf1822c3fea210d920c8ab0fcaabcd1798Helper contract: 0xd3926a4ab52f4f65207292c1b8153d48b7bcef31 What happens Every exit attempt fails. “Exit to ETH” failsManual exit failssimpleExit simulation fails every timeError shown: Execution reverted / Simulation Failed (#-39000) What I noticed The position still shows up normally in the UIRewards are still visibleNFT exists, but it seems controlled by the vault (not my wallet)The failure seems to happen during the reward claim/swap part of the exit What I tried I also tried interacting directly with the NFT (decreaseLiquidity), but that doesn’t work either since the vault owns it. Likely issue Looks like something in the reward claiming or swapping step is breaking the whole simpleExit call. What I need If possible, can you: fix the simpleExit flow on Lineaor provide a way to withdraw without claiming/swapping rewardsor an emergency withdraw option Right now the position seems stuck even though everything is still visible on-chain.
Two ideas: (Sorry if this sounds like a "social media" feature.)Latest PoolsNot sure if this is possible, but I'd figure I would suggest it any way. Is there a way to show "latest" or "newly added" pools? I've check Binance pools regularly and find myself re-checking tokens that weren't appearing last week only to find that someone opened a pool. Est. Rewards:When you are selecting your ranges, etc to deposit into a pool. Is there a way to pre-calculate/estimate deposit share, swap fee, and estimated Daily rewards before you make the big commitment? :)
Hello, There is a growing trend towards the Robotics and blockchain convergence and it would be a great opportunity to have different type of investment exposure to the Peaq Network and the GEODNet ecosystems on vFat.io. 1- There is a recent wPEAQ-wETH LP provided by Uniswap (wPEAQ-wETH LP Contract address on Uniswap 0x99188F1755B91b95e1F4D732536a833Fb82b4aD1) on the BASE network. 2-Also there are new robotics LPs available on the MachineX (Liquidity - MachineX) ecosystem with growing interest in Robotic tokens including RoboStack , Auki Labs , Peak Network itself and other robotics token. 3- For the GeodNet (GEOD) exposure, there are small Polygon LPs with growing interest on Uniswap (Geodnet (GEOD) on Polygon-Uniswap). Providing the ability to invest in these Peaq Network (via MachineNex + Uniswap) and Geodnet LPs (via Uniswap) would be truly awesome to the vFat community. Thank you!
I've noticed that the Total Earned value has been going down, not up. - How is this possible? - None of my pools are rebasing, just saw it update lower from normal processing. Last night I noticed it was $30 higher than it is today, I checked for rebase/harvest messages and only saw $8 harvest.
Hello, I have a WETH/USDC (Base) CL60 concentrated liquidity position that has been open for some time, and I've been experiencing an unexpected issue that started approximately one month ago. Every time I harvest or compound fees on this pool, the amount deducted from my position exceeds what should be taken. For example: When harvesting: I receive the correct fee amount, but an additional ~$10 is simultaneously removed from my principal positionWhen compounding: If my balance is $8,000 and I compound $30 in fees, instead of the position updating to $8,030, it only shows ~$8,005 I've tried refreshing and waiting, but the numbers do not correct themselves. A few important notes: This issue began approximately one month ago — everything functioned correctly before thatAll my other pools compound and harvest without any discrepancyThis appears to be isolated exclusively to this WETH/USDC (Base) CL60 pool I would appreciate any explanation as to why this is happening. Thank you.
I have a pancake swap arbitrum WETH/USDC on 0x5e09acf80c0296740ec5d6f643005a4ef8daa694 contract. I cant withdraw nor harvest anything on this position. After the transaction signing nothing happens.
Does a "cover" protect you, say over the course of 30 days even if you swap from one farm or liquidity pool during the 30 day period? For instance, say you buy the cover to protect you in one BNB-chain pair, but then later swap to a different BNB pair. Would the original cover will apply? Or is it tied solely to the pool or farm you initially bought it under? If that is the case, does that persist across rebalancing requests?
Hi guys! Everything was working fine till suddenly whenever I click on deposits it shows a blank screen. Could you help me out, please?
Hello guyz, Whenever I try to connect to my deposit page or pools page or farms page I get an error occured message.
Hello vFat.io Team, I just discovered a new DEFI Robotics projects with growing TVL Interest in a ROBOTMONEY-wETH LP on Uniswap. The project is called RobotMoney and the token address on BASE is: 0x65021a79aeef22b17cdc1b768f5e79a8618beba3 The Uniswap RobotMoney-wETH LP contract address is:0xcece56fd6eb8fcbc6c45af8181bfe71ea6057770630490cac36dbbc4aa27a4a6 It would be nice to have this new RobotMoney-wETH LP available on vFat.io Thank you
Wanted to start off by saying that I absolutely love the website. It does basically everything I am looking for. The only thing I would really like to see is a way to view price history between two coins. Every website lets you compaire coins to either usd or even to Bitcoin but I cannot find anything that would let say compaire eth/cbbtc or cbbtc/wbtc. Something like that would be huge when planning ranges for LPs. Also just as a side note. Like I said I love the site and was wondering how I could become a part of the development team. I currently have very little programming experience but it's something I've always been tempted to learn. Where would you recommend I start leaning to hopefully one day be able to work on this project with you all?